4 Simple Steps To Follow On How To Inflate Your Car

Putting air and conserving the air in your car tires are two of the most important things that every car owner should know. Your vehicle tires provide a crucial link between the driver and the road. A tire that is properly maintained provides the driver with the power to apply the brake, steer, and turn and increase the speed of the vehicle. Well-maintained car tires also prevent car users from getting into accidents.

Inflating your car tires may appear to be a difficult task but if you know how to properly do it, you will realize that it is just very easy and simple to do. Using the easy steps that you will find below, you will know how to inflate your car tires yourself. This will save you some money and time because you no longer have to pay and wait for someone to do it for you.

Reasons Why You Need To Inflate Your Car To The Recommended Level

Via: coolridesonline.net

Things You Need To Inflate Your Vehicle Tires

You need two very important things and they are already listed below:

1 - Pressure gauge. You need this to check the amount of pressure in your car tires. It can be found at the service station or with the tire dealers and you may decide to get one for your personal use because it is not really that expensive.

Via: fizzible.com

2 - Air compressor. This is used for putting air in your tires. It can be found at the gas station or you can also buy one for yourself.

​Find more about best air compressor for car tires

Via: aircompressortalk.com

Steps To Follow On How To Properly Inflate Car Tires

Inflating your car tires are mainly divided into two parts. These parts are as follows:

• PART I
• PART II

Check The Pressure Of Your Car Tire

Before putting air in your vehicle’s tire, the first and important thing to do is to check the amount of pressure in it. This will allow you to know whether to put air or to reduce the air in it. Here are some tips on how to properly check the pressure of the tire.

• Firstly, know the recommended pressure for the car by checking it in the user manual or on a yellow sticker that is usually placed on the door jamb at the driver side.
• Unscrew the valve cover and put it in a place where it won’t get lost.
• Press the valve stem with the pressure gauge to check the pressure. This can be done between 2 to 3 seconds before you release to get a precise reading. It is advised to check the pressure of the tire when it is cold because when it becomes warm it will increase the pressure in the car tire. This will result in the gauge not giving an accurate reading.
• Check the readings on the gauge and write all the readings of the car tires down for reference. If the pressure pump gauge reading is more than what the manufacturers recommend, reduce it by pressing the valve stem with the use of the pressure gauge tip. Also, if the reading is lesser than the manufacturer’s recommendation you need to add more by pumping air into it.

Putting Air In Your Car Tires

Step 1: Get An Air Compressor

Via: ytimg.com

If you have one, that’s cool! But if you don’t have one, no need to panic because you can use the air compressors that are provided at various service stations for just a token. Ensure your car is parked on a leveled surface and close to the air compressor to prevent the movement of the air compressor in an inconvenient position. You should also make sure it is in good shape.

Step 2: Remove The Dust Cap And Fill With Air

The next step to take is filling the tire with air using the air compressor. Firstly you need to remove the dust cap from the valve stem and press the hose of the compressor firmly to the valve stem. You will feel the movement of the air through the hose, this is just a confirmation that the air is getting into the car tire.

Step 3: Recheck The Car Pressure

Via: deelat.com

When you are satisfied with the pressure supplied to the tires, remove the hose. Check again to know if the car pressure is more than the manufacturer’s recommendation or lower. If it is more reduce it or add more like you did during your first checking.

Step 4: Replace The Dust Cap And Repeat The Steps For The Remaining Tires

Via: onlinetiresuppliers.com

When you are satisfied with the car pressure, make sure you return the valve cap to protect the valve stem from been blocked by dirt. You can now repeat the procedures for the remaining tires. Remember to check your extra tire so that you won’t be stranded when you need it.

Conclusion

By reading this tutorial, you can now fill your car tires with ease without waiting for someone to will do it for you. Make this part of your routine; it is recommended by the experts to check your car tire’s pressure at least once in every two weeks to ensure safety.

It is advisable to use your own pressure gauge because the pressure gauge at the service station may not be accurate due to lack of maintenance and poor usage. It will benefit your car and you won’t need to spend much.