Windscreen Traffic Film May be the Answer to Removing Grime

Many people have issues with smeared windscreen during rainy seasons. This is a persistent issue that has driven many drivers into frustration, and it’s one of the major headaches that many wanted to avoid. Read more about preventing vision impairment on a rainy day in this link here.

As drivers, many have experienced this. You get a few drops of rain, and when you activate your wipers for the windshield, a mosaic pattern is shown after a few seconds. In seasons where heavy rains are prevalent, it may look like someone had just poured a film on the screen, and the visibility is abysmal.

You may have tried to remove this using a scrunched-up and old newspaper, but it didn’t do any good. Some have tried various solvents or sodium lauryl sulfate with varying degrees of success. You may notice that it all comes to a head when you replace your car. You couldn’t see anything even if everything is new, and you still can’t get rid of what’s on the windshield, and you may seriously begin thinking that the glass is already damaged.

Oil Residues are Common on the Road

The smears are usually related to oil and anything related to wax, grease, and more. Essentially, every vehicle on the road leaves some oil deposits on the road that can be a headache to others. Some of this may be gritty or dusty, but there’s just too much grease and oil.

When it’s raining hard, especially after a long period of dry weather, the road can become too slippery because many oils sit on the tarmac before they get washed away. Any spray from the road can consist of grime, dirt, oil, and water, and it’s no surprise that you get a smear on your windshield. Now, there’s a point where you can wash some of it away, but eventually, there comes a time when the removal of the entire thing has become challenging.

Another thing is that washing your vehicle can cause a major case of smearing. You may be using rags or brushes on the garage that have wax on them, and these can transfer into the windscreen. You can see this on your fingerprints and begin noticing how greasy they can become when you accidentally smear them across the screen. It doesn’t take much for them to smear when the glass is wet.

There are also wipers where their rubbers can accumulate wax. Even if you have managed to get the glass cleaned off, know that smears can come back again, similar to when you’re dipping your pen in ink. This is a problem that many drivers encounter, and they are not sure how to get rid of it.

How Can You Get Rid of the Grease?

Know that some surfactants and detergents can remove wax and oil deposits. However, there’s a particular stubbornness to the car wax that many owners find challenging. Even some of the solutions may work at a specific point, but that was it. Others are powerful because of chemistry reasons, and they are more effective.

Some can purchase powdered or liquid detergents that they can add to their screen wash. However, the issue is the residue left after the drying of the product. Many have experienced success with sodium lauryl sulfate, which is considered a surfactant that’s anionic present in many household cleaners. They may remove most of the gunk and grime, but the wax residue is harder to remove.

Builders and decorators may use sugar soap, which is alkaline in nature and ideal for one-off cleaning. It’s believed to soften some of the gunk on the glass and make them gradually come off. You may see windscreens that are crystal-clear as a result. However, it may leave horrible residues than what you may use for screen wash.

About the Traffic Film Remover

You may want to check in with your local washing companies and be intrigued about the products that they are using during a quick power spray session. You may discover about the traffic film remover, which essentially is a solution. This will make cleaning traffic film a breeze, and it’s no surprise that so many are already using this. Along with a range of treatments, the TFR effectively removes most of the wax or oil film in the windscreen in one go.

You may be pleasantly surprised by its ability to attack some of the residues that may have been plaguing your car from the start. The concentration of the traffic film remover that you may need is just 1 to 2%, and you won’t have to worry about residues.

There are shops online where you can get several TFRs with various strengths or have foaming mousse. They will cling to the car, and you can wash them away, so you’ll be left with a clean and clear surface.

You can carry a small spray bottle to clean the bodywork and alloys whenever you have an upcoming test. The spray solution will remove some of the dust created by the break, bird crap, tree gum, blackberries, or whatever grime your car is getting in a day.

It’s worth noting that the right traffic film remover won’t damage your windscreen or paintwork in any way. This is a non-caustic type, and as long as you’re using this in the recommended concentration set by the manufacturers, you’re generally good to go. However, know that the TFR can remove any wax applications you’ve done, so you may have to re-wax your vehicle. However, this will work well when your goal is to remove wax in the first place.

Some varieties are considered the strongly caustic types. They are typically harsher but cheaper, and they are going to shift centuries of grime on the underside of your lorries. The solutions can also damage the paint when they are left alone for too long. Look for shops that can supply you with non-caustic types, and they should be specifically designed for cars so you won’t have issues later on.

Leave a Comment: